Tehnicavizuala
Contul meu
0 Favorite

Contul meu

Creeaza cont

Cablu audio 2RCA - 2RCA AudioQuest Sydney 1.5m

Cod produs: AUDHC-AQ-SYD01.5R
Producator: Audioquest
Livrare standard 19.9 lei

Bucuresti In stoc

Cluj-Napoca In stoc

Opinia clientilor

0 review-uri

1,150.00 lei

In stoc

De la 39.1 lei / Luna

Analog-Audio Interconnect Cable named after the Sydney Harbour Bridge, which is the tallest and widest steel-arch bridge in the world, and the fifth longest.

In all Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before.

Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.

Available Lengths: 0.6m-20m


SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS
 

Solid conductors prevent both electrical and magnetic interaction strand-to-strand interaction, major sources of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the fields within a conductor, and for the magnetic fields that extend outside the conductor. The astonishingly smooth and pure surface of all AudioQuests’s Perfect-Surface metals nearly eliminates harshness and greatly increases clarity compared to lesser materials. Extremely high-purity Perfect-Surface Copper+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.
 

ASYMMETRICAL DOUBLE-BALANCED GEOMETRY
 

Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.
 

POLYETHYLENE AIR-TUBE INSULATION
 

Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials.
 

CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS)
 

It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
 

COLD-WELDED, DIRECT-SILVER PLATED PURE PURPLE COPPER TERMINATIONS
 

Cold-Welded, Direct-Silver Plated Pure Purple Copper Terminations. Direct-Silver Plating is optimized for sound. It looks dull because there is no underlying layer of shiny, distortion-causing nickel.

Link catre producator.

Specificatii tehnice

Mufa iesire 2 x RCA
Suport 4K NU
Lungime cablu 1.5
Cablu Subwoofer NU
Tip mufa Metal
Ferrite NU
Mufa intrare 2 x RCA
Suport 3D NU
Conector Argintat
Amplificare NU

Reviewuri

Produsul nu are niciun review. Pentru a scrie un review, te rog sa te autentifici.

Tehnicavizuala
Cablu audio 2RCA - 2RCA AudioQuest Sydney 1.5m
Cablu audio 2RCA - 2RCA AudioQuest Sydney 1.5m
1,150.00 lei

Copyright © 2021